Shenjia Hydraulic

Release time:

2022-03-09

Inflation pump is also called air pump, air pump and air pump. The motor runs through the operation of the motor. When pumping, the valve of the connector is flushed open by the atmospheric pressure, and the gas enters the air cylinder. When pumping into the tire, the valve is closed by the pressure in the air cylinder, and the gas enters the tire. The gas enters the tire.

How to set the tire pressure when the inflation pump inflates the car?

Manually set tire pressure

1. You have to see the unit first

2. BAR call 2.4, 2.8

3. PSI, call 35-40

4. KPA calls 240-280

5. There is an M key to set. Set the preset value, and then start to play. When the preset value is reached, it will stop.

6. If you don't have a preset, you can just hit it directly and check the value. When it comes to stopping, you can stop.

7. Inflation pump is also called air pump, air pump and air pump. The motor runs through the operation of the motor. When pumping, the valve of the connector is flushed open by the atmospheric pressure, and the gas enters the air cylinder. When pumping into the tire, the valve is closed by the pressure in the air cylinder, and the gas enters the tire. The gas enters the tire.

8. It also uses the principle of atmospheric pressure to inflate with cars, rubber balls and rubber boats.

9. The booster pump will automatically start to supplement the leakage pressure and keep the circuit pressure constant no matter what causes the pressure drop of the pressure maintaining circuit of the inflation pump.

10. Inflation pump belongs to vehicle electrical products.

11. Pneumatic booster pump is divided into gas-liquid booster pump and gas booster pump. The principle of gas-liquid booster pump is to use the low pressure of large area piston to generate high hydraulic pressure of small area piston.

12. Multiple gas drives: compressed air, nitrogen, steam, natural gas, etc. can be used as the driving gas source of the pump.

13. Wide range of applications: in the industrial field, it is used for clamping machine tool chucks, inflating accumulators, inflating high-pressure bottles, and converting pressure reducing gases into high-pressure gases.

14. Booster pump can be used for any air source with insufficient pressure, whether mechanical or testing device